How do you wire a 24V trolling motor plug?

How do you wire a 24 volt trolling motor plug?

Feed the wires through the plug housing. On the 12-24V trolling motor plug, connect the positive 24V wire to the terminal marked “24”, the 12V wire to the terminal marked “12” and the negative wire to the terminal marked “-”. On straight 24V trolling motors, connect the two wires to “24” and “-” as appropriate.

Which wire is positive on trolling motor?

Trolling Motors With 4 Wires

The red wires are the positive wires, while the black wires are the negative ones. Attach one set of red and black wires to one battery’s positive and negative poles and the other set to the other battery or battery setup.

Will a 24V trolling motor run on 12V?

24v hooked to 12v will spin for a while on a full battery but there will be no torque. You could stop it with your hand. It is like running your motor with half the spark plugs missing.

Why does my trolling motor plug have 3 wires?

The three wires are for a trolling motor that will operate on either 12 volts or 24 volts. 12/24 volt motors have a switch to choose which you want. Thus the third wire to send power to the 24 volt side of the switch.

IT IS INTERESTING:  How much is a motorized bike kit?

Do I need a plug for trolling motor?

Without a plug, you have to wire your trolling motor directly to your battery. While this is more than fine for making it work, it means that you cannot remove the trolling motor without undoing that wiring. A plug solves these problems.

Do they make a 24 volt trolling motor battery?

RELiON offers 12-Volt and 24-Volt lithium batteries. If you have a 12-Volt trolling motor, then you can choose from several 12-Volt options. If you have a 24-Volt motor, you can use 2 12-Volt batteries in series or a single 24-Volt battery and if you have a 36-Volt motor you can use 3 12-Volt batteries in series. 2.

Do you need marine wire for trolling motor?

DC voltage decreases as the length gets longer which increases the amperage. Amperage increase means you need thicker wire to handle the amperage draw from the trolling motor and the heat that the electricity produces. IMO, the best wire to use is marine grade.

How many amps does a 50 lb thrust trolling motor use?

Thrust Trolling Motor has a max amp draw of 52 amps/hr but only 5 lbs more thrust. 3. Because of the larger windings in the 50 lb thrust model, lower speeds use less amperage for the same thrust.

How many amps does a 36 volt trolling motor pull?

A batteries specs always state that there is something like 210 reserve minutes at 25 amps.