Frequent question: Is it hard to install a trolling motor?

How long does it take to install a trolling motor?

Total man hours spent on the install was 14 hours ($1,900), with another 4 hours ($540) on the custom starboard, plus wiring, screws and other installation bits and pieces “I would plan on about a week of time to do the install, give or take, actual time on the boat may be less may be more,” Held said of the process, …

What do you need to hook up a trolling motor?

Connect a connector cable to the positive (+) terminal of battery 1 and to the negative (-) terminal of battery 2. The jumper wire used should be one size larger than the Trolling Motor lead wire. Connect a connector cable to the positive (+) terminal of battery 2 and to the negative (-) terminal of battery 3.

How many lb thrust trolling motor do I need?

Boat weight is the most important consideration to take into account when choosing a trolling motor. A beginning rule of thumb is that you want a minimum of 2 lbs of thrust for every 100lbs. For example, if you have a 3000lb boat, fully loaded, then the calculation is (3000/100) * 2 = 60lbs of thrust.

IT IS INTERESTING:  How do you find the frequency of a BLDC motor?

Does Cabela’s install trolling motors?

Professional Installation

All POWER PROS service centers have technicians who are factory trained to install fishfinders, trolling motors, marine radios, battery chargers and more.

Do you need marine wire for trolling motor?

DC voltage decreases as the length gets longer which increases the amperage. Amperage increase means you need thicker wire to handle the amperage draw from the trolling motor and the heat that the electricity produces. IMO, the best wire to use is marine grade.

Why does my trolling motor plug have 3 wires?

The three wires are for a trolling motor that will operate on either 12 volts or 24 volts. 12/24 volt motors have a switch to choose which you want. Thus the third wire to send power to the 24 volt side of the switch.

Do you need a circuit breaker for a trolling motor?

It is highly recommended that a circuit breaker or fuse be used when installing a trolling motor. … For motors requiring a 60-amp breaker, the Minn Kota MKR-19 60-amp circuit breaker is recommended.

Will toggle bolts hold trolling motor?

The toggle bolts alone will hold it fine, the 5200 is just extra and creates a seal.

What side of the bow do you mount a trolling motor on?

Decide which side of the bow – port or starboard – you want to mount the motor. There’s no “wrong” answer for this as it really depends on how you operate the boat and how you fish. If you usually steer the boat from the port side, you’ll want to consider mounting the motor on the starboard side to improve visibility.

IT IS INTERESTING:  What stepper motor do I need for CNC?

Can you mount a trolling motor on the side of a kayak?

The motor mount is the actual accessory that attaches to your kayak and then holds the trolling motor in place. There are a variety of mounts available on the market. Some are designed to attach to the bow or stern of your kayak while others allow you to attach your trolling motor to the side of your kayak.