**Contents**show

## What size is a 540 motor?

Those numbers refer to the motor diameter. 540 has a **diameter of 36mm**.

## What are the dimensions of a 550 motor?

550 motor size, **3.175mm output** shaft.

## How big is a 540 brushed motor?

**Length: 1.96in / 50mm**. Output Shaft Length: 0.43in / 11mm. Output Shaft OD: 0.12in / 3.1mm. Min and Max Voltage Range: 2.4V-30V.

## What does 540 mean on a RC motor?

540/550 describes **the size of the motor can**. Larger numbers mean bigger can diameter. Turns and kv are related, in that the lower turn motors are higher kv. Less turns means higher rpm, with less torque.

## What does 12 turn motor mean?

ORIGINAL: Dawman. A 12 turn motor will be tons faster and will drain a battery faster . Just as he said. a twelve turn motor will have more RPM, less torque, and draw more current. The number or turns refers toi the number of **times the wire is warpped around your armature in the motor**.

## What’s the fastest brushed RC motor?

“**The Traxxas XO-1** is the fastest RC car, full stop. The largest brushless motor on offer propels the car from 1 to 60 in 2.5 seconds. Not only is this car stylish, but it also reaches speeds over 100 miles per hour.”

## How do you size a brushless motor?

Typically the best place to start when sizing a brushless DC motor is matching motor size (diameter, length). **Diameter ranges from 13 mm to 30 mm**. Brushless DC slotted motor diameter and length are specified in inches.

## Are all 775 motors the same?

The number 775 stands for this standard size. It is **in the same fashion to the number** with 130/ 140 motor. The shaft size diameter of 5 mm is standard and adopted by almost all manufacturers. The length of the shaft can differ in accordance to the requirements, but a 17 mm shaft is seen commonly.

## What does turns mean on a RC motor?

Turns. Turns refers to **the number of times the copper wire has actually been revolved around the armature**. The higher the number of turns greater is the torque generated and hence greater is the power delivered. However that also means less RPM rating for your rc car electric motor.

## What is RC motor size?

The most common motor sizes are: **370- size** (frequently used in minis or small scale), 540-size (the most typical motor on the market, used for most 1/10-scale applications), 550-size (usually used for large 1/10-scale vehicles like 4×4 short course) and 1/8-scale-size (used for 1/8-scale vehicles and large monster …

## What do brushless motor numbers mean?

Brushless motors are typically categorized by a **four-digit number** – such as **##. where as the “**” numbers are the stator width and “##” is the stator height. Essentially, the wider and taller the motor is, the larger the numbers are and the more torque it can produce.