Should I use anti-seize on Bosch spark plugs?
For Landfill applications, anti-seize is highly recommended. Bosch recommends Loctite Heavy Duty Metal Free anti-seize part number 51605. When applying anti-seize, only put a small amount at the base of the spark plug as shown.
Where should you not use anti-seize?
When not to use anti-seize
The threads need to be chased, re-tapped, or repaired. Do not use anti-seize as a lubricant such as on caliper slide pins or on threads for a bushing press or any mechanical assembly that requires a lubricant.
Should I use anti-seize on e3 spark plugs?
Anti-seize compound is not necessary but if used, USE SPARINGLY! Only a tiny drop is needed at the beginning of the threads. The rest of the threads will be coated as the plug is screwed into the engine. … Plugs not seated properly will lead to overheating of the spark plug, resulting in detonation.
Does Vaseline work as dielectric grease?
Vaseline can work as a substitute for dielectric grease, the big differences are that it can degrade rubber and plastics over time, and it’s combustible – but I’ve used it in the past on car bulbs, wiring and battery terminals and it hasn’t been a problem yet.
Where should you not use dielectric grease?
See all 4 photos Since it’s a low-viscosity grease, many experts advise not to use dielectric grease in high-temperature components that will see in excess of 500 degrees Fahrenheit.
What can I use instead of anti-seize?
Anti-seize Compounds used on ships:
- Copaslip/ Alumslip/ Nickelslip.
- Lubricating Oil.
- Soft soap/White petroleum jelly/Vaseline.
Can I use grease instead of anti-seize?
You can use grease quite effectively as an anti-seize compound. It’s not as good in high temperature applications, but there aren’t any of those on a bike. However, NEVER use anti-seize compound as a lubricant.